Adding Voicee to Yealink Devices
Zero Touch Provisioning Now Available
Voicee connects directly to Yealink Phones via their Zero Touch Provisioning, all modern Yealink SIP Phones support this feature, where the configuration is downloaded automatically from Voicee's servers, simply by entering your device's MAC Address information. It only takes 1 minute to setup and is included with your Voicee plan. Read More here.
Voicee works perfectly with Yealink Devices and other SIP Based Phones.
To get started, you will need these elements:
- A Yealink Phone connected via Ethernet
- A computer or Ipad connects to the same network as the Yealink phone
You will require physical access to the Yealink phone in order to setup your device.
Step 1. Get the IP Address of the Yealink Phone
Please find your phone model below to find your IP Address.
Copy the IPv4 Address, this is usually formatted like: 192.168.1.xxx
Note: If a list of missed calls appear, click the Back button and click the OK button again
Phone Model | Instructions for getting the IP Address |
Yealink T21P | Press OK on the phone. The IP address should be shown on the first line labeled IPv4. |
Yealink T46S | 1. Press the Menu icon then select Status. |
Yealink W52P Yealink W73P | 1. Pickup one of the handsets that is registered to the base station, then press OK |
Step 2. Login to the Yealink Phone
Take the IP Address from Step 1 and enter it in Chrome, Safari or Internet Explorer on your Computer or laptop
On newer models, you may be prompted to accept an insecure connection, this is OK and safe to continue.
Enter the Default username and password
USERNAME | admin |
PASSWORD | admin |
If the password does not work, please factory reset your Yealink device
Step 3. Open Accounts
Go to the Account Tab > Register
Old interface | New Interface |
Make sure you're editing the Account1 if this is a new device. If this is an exsisting device and you wish to add more than one registration, please select the most appropriate Account
Many Yealink Devices allow you to have More than 1 Account on the same physical phone.
Step 4. Enter your Device Credentials
Login to your Voicee dashboard
Go to Sites > (The Site you wish to Configure)
Find Site Devices
Simply enter the username, domain and password in the below fields
Ensure Enable Outbound Proxy Server is disabled or set correctly if you need to use a Proxy Server.
Congratulations you're done!
If your Yealink is connected correctly to our server, you will see a Registered sign.
If it returns a Registered Failed, please contact support to troubleshoot the error.
Adding Multiple Devices to a Yealink Phone
Some VoIP Phones are able to handle more than 1 device, you can learn more about assigning Handsets below: